Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Sausalito PCI PCA .
Code: 01.0:10
Description: Problem with the Sausalito PCI PCA.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Sausalito PCI PCA . • If the System Error continues, replace the Main PCA .
Code: 01.1:10
Description: Problem with the PrintMech PCA.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the cables between the PrintMech PCA and the Sausalito PCI PCA are not damaged and are correctly connected. • Replace the PrintMech PCA . • If the System Error continues, replace the Sausalito PCI PCA .
Code: 01.2:10
Description: ISS PCA problem.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Low humidity in the customerfs environment can be a cause of this system errror. You can check the humidity by using the EWS. Click on the ePrinter Information Pagef and select the eCurrent Infomationf tab. The humidity level will be displayed, a low level that would cause the error is around -20%. To solve errror upgrade with the latest firmware, at least 7.0.0.3. If the printer cannot be upgraded using the normal process, upgrade using the .plt emergency file process . • If the System Error continues, replace the Ink Supply Tubes and Trailing Cable .
Code: 02.1:10
Description: Problem with the Carriage PCA.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Trailing Cable is not damaged. • Check that the Trailing Cable is correctly connected to the Carriage PCA, Interconnect PCA and to the Sausalito PCI PCA. • Replace the Carriage PCA . • Replace the Sausalito PCI PCA . • Replace the Interconnect PCA.
Code: 03:10
Description: Problem with the Power Supply Unit.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Electronics Modules Test () to troubleshoot the problem further. • If the System Error continues, replace the Power Supply Unit .