Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the CPU Fan . • If the System Error continues, replace the Main PCA .
Code: 05.3:10
Description: Main memory size failure.
Remedy: • Check that at least 256 megabytes of memory is installed in the Printer. • Check that the Memory Module is installed correctly. • Try installing the Memory Module in the other Memory slot and check if the System Error appears. • If the System Error reappears, replace the Memory Module . • If the System Error does NOT reappear, then the original slot could be faulty. In this case, replace the Main PCA
Code: 06:03
Description: NVM file has bad CRC.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Hard Disk Drive .
Code: 06:10
Description: Main NVM failure - not detected, read/write failed or readback error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Hard Disk Drive .
Code: 07:10
Description: Aerosol Fan driver burnt.
Remedy: • Replace the Interconnect PCA . • If the System Error continues, replace the Sausalito PCI PCA . NOTE: Replace one part at a time and check if the error has cleared before replacing another.
Code: 08:11
Description: Problem with communication between the Front Panel, the Formatter and the HDD.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Front Panel cable is not damaged and is correctly connected to the Front Panel and to the Interconnect PCA. • Check that the Memory Module is installed correctly. • Check that the cables between the Interconnect PCA and the Main PCA are not damaged and are correctly connected. • Check that the cables between the Hard Disk Drive and the Power Supply Unit and the Main PCA are not damaged and are correctly connected. • Check that the cable between the Power Supply Unit and the Main PCA is not damaged and is correctly connected. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the Hard Disk Drive . • Replace the Main PCA . • Replace the Memory Module . • Replace the Interconnect PCA . • Replace the Front Panel . • Replace the Sausalito PCI PCA.