Description: An unexpected message was received while homing the Cap/Wipe/Purge assembly, usually during system initialization. This fault is due to a failure of the Y-Axis Encoder
Code: 09,009.44
Display: 09,009.44 IL_FAULT_INK_UNPLUG
Description: Ink well sense cable on the printhead appears to be unplugged.
Code: 11,001.60
Display: 11,001.60 DMC_PROG_FAULT(1)
Description: Timer Event Missed. A health check routine is called every 400 milliseconds, the A/D update period, and checks that all the currently pending timer events are for some time in the future. It generates this error if it detects a timer event for some time in the past. A missed DMC interrupt, due to interrupts disabled too long by any region, is the probable cause.
Code: 11,007.66
Display: 11,007.66 DMC_PROG_FAULT(7)
Description: Event parameter Block not Prepped. The parameter block associated with a DMC event notification was not prepped with a call to dmc_prep_event_parm_block() before the call to dmc_request_event_notification().
Code: 11,008.67
Display: 11,008.67 DMC_PROG_FAULT(8)
Description: Bad Message ID in Event Request. The parameter block for a DMC event notification request contains an inconsistent state field in the ITC status message.
Code: 11,011.61
Display: 11,011.61
Description: DMC event parameter block not found. The DMC library was attempting to locate an event parameter block in its linked list. The block was not found.