Xerox Phaser 6280
Error Codes List page 11
|
- Code: 116-390
- Description: NVRAM Error When the printer is turned On, the error is detected between the NVRAM size required by the system and its actual size.
- Causes: • Image Processor Board, PL9.1.27
- Remedy: 1 1. Check the Image Processor Board for correct installation. 2. Is the Image Processor Board correctly installed? Go to step 2. Reseat the Image Processor Board. 2 Does the error still occur? Replace the Image Processor Board. Complete.
- Code: 116-392
- Description: MACPHY Chip Test Error MACPHY Chip Test error occurs.
- Causes: • Image Processor Board, PL9.1.27
- Remedy: 1 1. Reboot the printer. 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.
- Code: 116-393
- Description: MACPHY Internal Loop Test Error MACPHY Internal Loop Test error occurs.
- Causes: • Image Processor Board, PL9.1.27
- Remedy: 1 1. Reboot the printer. 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.
- Code: 116-394
- Description: MACPHY External Loop Test Error MACPHY External Loop Test error occurs.
- Causes: • Image Processor Board, PL9.1.27
- Remedy: 1 1. Reboot the printer. 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.