Xerox Phaser 6280

• Code: 094-422
• Description: Ready Transfer Unit Life The Transfer Unit is near or has reached its end of life.
• Causes: • Transfer Unit, PL4.1.1 • MCU Board, PL9.1.20
• Remedy: 1 1. Check the Transfer Unit life: Service Mode > Parameter > Life DTB Feed. 2. Does the number show the maximum life page? Replace the Transfer Unit. Go to step 2. 2 1. Check the Transfer Unit for correct installation. 2. Is the Transfer Unit installed correctly? Go to step 3. Reseat the Transfer Unit. 3 1. Replace the Transfer Unit. 2. Does the error still occur? Replace the MCU Board. Complete.

• Code: 094-910
• Description: Insert Transfer Unit The printer does not detect the Transfer Unit.
• Causes: • Front Cover Harness, PL1.2.11 • Transfer Unit, PL4.1.1 • MCU Board, PL9.1.20 • Right Side Harness, PL10.1.15
• Remedy: 1 1. Is the Transfer Unit installed correctly? 2. Is the Transfer Unit correctly installed? Go to step 2. Reseat the Transfer Unit. 2 Does the error still occur? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/ J27, P/J272, and P/J2721 between the MCU Board and the Transfer Unit. 2. Are the connectors securely connected? Go to step 4. Reconnect the connectors. 4 Check the Right Side Harness for continuity. 1. Disconnect P/J27 from the MCU Board and P/J272 from the Front Cover Harness. 2. Check continuity between P/J27 <=> P/ J272. Go to step 5. Replace the Right Side Harness. 5 Check the Front Cover Harness for continuity. 1. Disconnect P/J272 from the Right Side Harness and P/J2721 from the Transfer Unit. 2. Check continuity between P/J272 <=> P/ J2721. Go to step 6. Replace the Front Cover Harness. 6 1. Replace the Transfer Unit. 2. Does the error still occur? Replace the MCU Board. Complete.

• Code: 116-314 ... 116-343
• Description: Controller System Error The printer controller has detected error. Note For Chain Link 116-324: This error has occurred due to an optional 256 MB memory card is installed. Data is corrupted due to that it was stored/ accessed at incorrect locations. • Chain Link 116-314: On Board Network MAC Address Checksum Error • Chain Link 116-315: ESS On Board RAM W/R Check Fail • Chain Link 116-317: ESS ROM Check (Main) Fail • Chain Link 116-323: ESS NVRAM1 W/R Check Fail • Chain Link 116-324: ESS Illegal Exception • Chain Link 116-326: ESS NVRAM2 W/R Check Fail • Chain Link 116-327: ESS Instruction Cache Error • Chain Link 116-328: ESS Data Cache Error • Chain Link 116-343: ASIC Error (ASIC Fail)
• Causes: • Image Processor Board, PL9.1.27 • Memory Card, PL9.1.30
• Remedy: 1 1. Print the Configuration page and check the total memory capacity. 2. Does the total memory capacity show 512 MB? Go to step 2. Go to step 3. 2 1. Check the memory card in the optional memory slot. 2. Is there a 256 MB memory card installed? Remove the optional 256 MB memory card. Go to step 3. 3 1. Check the Image Processor Board for correct installation. 2. Is the Image Processor Board correctly installed? Go to step 2. Reseat the Image Processor Board. 4 Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 116-316, 116-320
• Description: RAM Error The printer controller has detected RAM error. • Chain Link 116-316: ESS DIM Slot RAM W/R Check Fail • Chain Link 116-320: ESS DIMM Slot RAM Error
• Causes: • Image Processor Board, PL9.1.27 • Memory Card (Option), PL9.1.30
• Remedy: 1 1. Verify RAM is compatible with the printer. If RAM was recently installed, it may not be compatible. 2. Is RAM compatible? Go to step 2. Replace the Memory Card. 2 1. Check the Memory Card for correct installation. 2. Is the Memory Card correctly installed? Go to step 3. Complete. 3 1. Replace the Memory Card. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 116-333, 116-353
• Description: Hard Disk Error Hard Disk error has occurred. • Chain Link 116-333: PCI Option #0 Fail • Chain Link 116-353: ESS HD Fail
• Causes: • Image Processor Board, PL9.1.27 • Hard Disk Drive (Option), PL91..47
• Remedy: 1 1. Check the Hard Disk Drive for correct installation. Reseat the Hard Disk Drive. 2. Does the error still occur? Go to step 2. Complete. 2 1. Replace the Hard Disk Drive. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 116-350 ... 116-355
• Description: Network Error Failure occurred on the Image Processor Board. • Chain Link 116-350: Network Error (On Board Network Communication Fail) • Chain Link 116-351: Network Error (On Board Network Ethernet BIST Parity/RAM R/W Error) • Chain Link 116-352: Network Error (On Board Network Internal Loopback Error) • Chain Link 116-355: Network Error (On Board Network Fatal Error)
• Causes: • Image Processor Board, PL9.1.27
• Remedy: 1 1. Check the Image Processor Board for correct installation. 2. Is the Image Processor Board correctly installed? Go to step 2. Reseat the Image Processor Board. Go to step 2. 2 Does the error still occur? Replace the Image Processor Board. Complete.