Toshiba e-Studio 2329A
Error Codes List page 9
|
|
- Code: F090
- Description: Memory abnormality on the MAIN board
- Causes: Memory abnormality on the MAIN board
- Remedy: 1. Turn the power off, and start up the Setting Mode (08). 2. When "TEST MODE D" is displayed on the control panel, key in code: 9080 and press the [START] key. Notes: Code: 9080 cannot be keyed in except when 08-9010 is ON. To set the 08-9010, if this is the case, key in 08-9010 → [START] → [CLEAR] → key in [1] → [OK].
3. When “SELECT DESTINATION” is displayed, use the keys Up Down to select a direction and press the [OK] key.
4. When “MC=9080” is displayed on the control panel, press the [OK] key. To cancel, press the [CANCEL] key.
5. If flash memory clear ends normally, “INITIALIZE=OK” is displayed on the control panel, it automatically changes to the initial screen of the 08 mode.
6. Perform the initialization after the software version upgrade (08- 9030).
7. Display the serial number (08-9601) and check the serial number. Key in the correct serial number using 08-9601 if the serial number is different from the serial number on the identification plate on the back cover.
8. Set the 08-9010 to “0”.
9. Check if the fax function is installed and then set the 08-9063 accordingly. 0: Not installed 1: Installed
10. Turn the power off and then on, if the error is not corrected, replace the flash memory on the MAIN board.
Replacement part: Memory on the MAIN board. 2523A/2523AD/2323AM/2823AM: IC10 2329A/2829A: IC11
- Code: F901
- Description: Engine speed error
- Causes: The speed information of the MAIN board is damaged. A MAIN board not corresponding to the equipment model is installed.
- Remedy: Harness Check if there is no problem in the harness for connecting to the following connector. MAIN board: CN15
MAIN board Check if the installed MAIN board corresponds to the equipment model. Check if the label color of the MAIN board (indicated in the figure with the arrow) corresponds to the equipment model (indicated on the rating label). 2523A: White 2323AM: Blue 2823AM: Green 2523AD: Gray 2329A: Red 2329A(NAD): Purple 2829A: Yellow 2829A(NAD): Brown
Parts to be replaced: Harness. MAIN board.