Description: Software Error (Operation Can Continue) The software performed in an unexpected way. By taking recovery measures, further operation is possible.
Causes: • The parameter is invalid. • There is insufficient work memory. • This SC is caused by errors that are not normally detected from the hardware.
Remedy: Nil
Code: SC992-00
Description: Undefined SC An undefined SC has occurred.
Causes: There is a bug in the software.
Remedy: Turn the main power OFF then ON.
Code: SC997-00
Description: Application Function Selection Error The application did not function normally after pressing the application key on the operation panel.
Causes: There is a bug in the software.
Remedy: • Check if the options required by the application (RAM, DIMM, boards) are installed properly. • Check whether downloaded applications are correctly configured.
Code: SC998-00
Description: Application Start Error • After power ON, no application program was registered to the system within the specified period of time. (No application started or ended normally.). • Even though the application started up, it cannot be rendered due to an unknown fault.
Causes: • There is a bug in the software. • The options required by the application (RAM, DIMM, board) are not installed.
Remedy: • Turn the main power OFF then ON. • Check the RAM, DIMM, and boards. • Check the application configurations. • Replace the controller board.