Ricoh D124 MPCW2200SP

• Code: SC101
• Description: Scanner Lamp Error At power on the scan lamp trigger remained off.
• Causes: •X CIS-to-IPU harness loose, broken, defective •X CIS-to-IOB harness loose, broken, defective •X IPU defective •X IOB defective •X CIS defective
• Remedy:

• Code: SC143
• Description: Scanner Automatic Adjustment Error Automatic adjustment of the CIS failed at power on.
• Causes: •X Standard white strips dirty or not platen white plate installed improperly •X CIS LED defective and not lighting •X CIS-to-PSU harness loose, broken, defective •X CIS-to-IPU harness loose, broken, defective •X CIS defective •X MCU defective •X SIF defective •X IPU defective
• Remedy:

• Code: SC144
• Description: SIB Communication Error SIB serial transmission did not begin after power on.
• Causes: •X SIF-to-IPU harness connector loose, broken, defective •X SIF defective •X MCU defective •X IPU defective
• Remedy:

• Code: SC161-02
• Description: IPU Error 2: Ri2005 SIB Response Error. At power on, or when the machine returned from energy save mode, an IPU error occurred because Ri did not respond within 5 ms.
• Causes: •X IPU defective
• Remedy:

• Code: SC161-03
• Description: IPU Error 3: Ri2005 S-to-M Response Error At power on, or when the machine returned from energy save mode, the Ri2005 chip on the IPU did not respond within 5 ms.
• Causes: •X IPU defective
• Remedy:

• Code: SC161-05
• Description: IPU Error: Ri2005 M-to-P Response Error. At power on, or when the machine returned from energy save mode, the Ri2005 chip on the IPU did not respond within 5 ms.
• Causes: •X IPU defective
• Remedy: