Description: Application function selection error
The application selected by a key press on operation panel does not start or ends abnormally.
Causes: • Download the firmware for the application that failed • An option required by the application (RAM, DIMM, board) is not installed
Description: Application start error
After power on, the application does not start within 60 s. (All applications neither start nor end normally.)
Causes: • Download controller firmware • Replace the controller board • An option required by the application (RAM, DIMM, board) is not installed
Description: Program download error
The download (program, print data, language data) from the IC card does not execute normally.
Causes: • Board installed incorrectly • BICU board defective • Controller board defective • IC card defective • NVRAM defective • Loss of power during downloading Important Notes About SC999 • Primarily intended for operating in the download mode, logging is not performed with SC999. • If the machine loses power while downloading, or if for some other reason the download does not end normally, this could damage the controller board or the PCB targeted for the download and prevent subsequent downloading. If this problem occurs, the damaged PCB must be replaced.