PrintCopy.info service

Ricoh Aficio 180

Error Codes List page 1

  • Code: SC101
  • Description: Exposure lamp error
    The standard while level was not detected properly when scanning the white plate.
  • Causes: • Exposure lamp defective • Exposure lamp stabilizer defective • Exposure lamp connector defective • Dirty scanner mirror or scanner mirror out of position • SBU board defective • SBU connector defective • Lens block out of position
  • Code: SC120
  • Description: Scanner home position error 1
    The scanner home position sensor does not detect the off condition during initialization or copying.
  • Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective
  • Code: SC121
  • Description: Scanner home position error 2
    The scanner home position sensor does not detect the on condition during initialization or copying.
  • Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective
  • Code: SC122
  • Description: Scanner home position error 3
    The scanner home position sensor detects the on condition while the scanner is returning to the home position.
  • Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective
  • Code: SC123
  • Description: Scanner home position error 4
    The scanner home position sensor does not detect the on condition after the scanner returns to the home position.
  • Causes: • Scanner home position sensor defective • Scanner drive motor defective • Scanner home position sensor connector defective • Scanner drive motor connector defective • IOB board defective
  • Code: SC192
  • Description: Automatic SBU adjustment error
    An error is detected during automatic SBU adjustment (SP4-903)
  • Causes: • SBU defective • BICU board defective • Exposure lamp stabilizer defective • Exposure lamp defective • Dirty white plate
  • Code: SC194
  • Description: IPU White Level Detection Error
    The level of the white standard pattern detected by the IPU chip (on the BICU board) is too low.
  • Causes: • Exposure lamp defective • BICU board defective • Incorrect position of the white standard pattern • Dirty white plate • SBU board defective
  • Code: SC302
  • Description: Charge roller current leak
    A charge roller current leak signal is detected.
  • Causes: • Charge roller damaged • Charge high voltage supply board defective • Poor connection of the PCU
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us