-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Mimaki CG60ST
Error Codes List page 6
|
|
- Code: nc06
- Display: ** DIGITIZE **
- Description: A digitize command (DP;) was keys, executed.
- Remedy: Move the pen tip to the target point with the jog keys, then press the "Enter" key to enter that point.
- Code: nc07
- Display: * XXX/XXX COPY *
- Description: "No. COPIES" execution is in progress.
- Remedy: This is not an error, so no action is needed.
- Code: nc08
- Display: ** END COPY **
- Description: "No. COPIES" was ended forcibly after one sheet was cut.
- Remedy: An origin update command (PG, ZT) is included in he data, so "No. COPIES" that will make effective use of the sheet is not possible.
- Code: nc09
- Display: ** PAPER CUT **
- Description: This appears while paper cutting is in progress.
- Remedy: This is not an error, so no action is necessary.
- Code: nc10
- Display: ** PAPER CUT **
- Description: This appears while paper cutting is in progress.
- Remedy: This is not an error, so no action is necessary.
- Code: nc11
- Display: **DIVISION**
- Description: Cutting according to partitioned cutting data is in progress.
- Remedy: This is not an error, so no action is necessary.