Description: 1. The slider assembly and the timing belt located on the guide bar are broken or come out of position. 2. Loosen pinion of the motor. 3. Y sensor fault 4. DIP switch settings do not match the model. 5. Y origin douser fault
Remedy: I. Replace the timing belt. 2. Tighten up the screw. 3. Conduct a sensor test to check ON/OFF of the Y sensor. 4. Change the settings of DIP switch so that they match the model. 5. Check the state of Y-origin douser.
Code: nc01
Display: illegal ipt ***
Description: Malfunction in the main PCB assembly.
Remedy: Replace the main PCB assembly.
Code: nc02
Display: ** OFFSCALE **
Description: The transmitted data has exceeded exceeded the effective cutting range.
Remedy: Reduce the size of the data to the size within the effective cutting range.
Code: nc03
Display: ** NO SHEET **
Description: The pinch roller was lowered even though a sheet was not set.
Remedy: 1. Set a sheet in place. 2. If this error is indicated even when a sheet is set in place, check the sensor action with a "sensor test". 3. Replace the sensor. 4. If the sheet sensor does not detect a transparent sheet or a sheet of which wrong side is colored in black, render the sheet sensor inoperative with "Sheet sensor" function.
Code: nc04
Display: *SHEET sensor OFF*
Description: Tum OFF the sheet sensor with "Sheet sensor" function.
Remedy: Tum ON/OFF the sheet sensor if necessary.
Code: nc05
Display: **VIEW**
Description: The machine is in its off-line mode because the "not-ready command (NR;)" has been executed.
Remedy: Perform necessary operations, such as setting the origin, etc., then press the "remote/local" key to cause the machine to enter the on-line mode.