Description: <IOT Fuser Life Over> The fuser has reached the replacement time.
Remedy: 1 Is the fuser assembly installed correctly? Go to step 3. Reinstall the fuser assembly. See “Fuser removal”. Then go to step 2. 2 Does the error still occur when the power is turned on? Go to step 3. Problem resolved. 3 Replace the fuser assembly. See “Fuser removal”. Does the error still occur when the power is turned on? Replace the controller board. See “Controller board removal”. Problem resolved.
Description: <IOT Fuser Failure> A fuser error is detected.
Remedy: 1 Check the fuser installation. Is fuser installed correctly? Go to step 2. Reinstall the fuser assembly. Then go to step 2. 2 Does the error still occur when the print is turned on? Go to step 3. Problem resolved.
Description: <Download Delete Error> An error occurred erasing the Flash
Remedy: 1 Reinstall the RIP board. See “RIP board removal”. Does the error display when the power is turned on? Replace the RIP board. See “RIP board removal”. Problem resolved.
Description: <Download Write Error> An error occurred writing to the Flash.
Remedy: 1 Reinstall the RIP board. See “RIP board removal”. Does the error display when the power is turned on? Replace the RIP board. See “RIP board removal”. Problem resolved
Description: <Download Verify Error> An error occurred verifying the Flash.
Remedy: 1 Reinstall the RIP board. See “RIP board removal”. Does the error display when the power is turned on? Replace the RIP board. See “RIP board removal”. Problem resolved
Code: 016-503...016-507
Display: Email Error Invalid SMTP Server Error 016-503 Press OK Email Login Error SMTP Login Failed Error 016-507 Press OK
Description: <SMTP Server Address Resolution Fail for Maillib> Failed to Resolve SMTP Server Name at Mail Reception.
Remedy: 1 Check the network connection using the Ping command. Is the printer connected to the network? Go to step 2. Go to step 5. 2 Check the Address Book. 1. On the operator panel, press System to access the user menus. 2. Select Admin Menu, and press OK. 3. Select Address Book, and press OK. 4. Select the type of dialing. Is the Address Book in the Admin Menu set correctly? Go to step 3. Set the Address Book. 3 Do the settings of the MFP match the specifications for the server? Go to step 4. Change the server. 4 Reinstall the engine board. See “Engine board removal”. Does the error still occur when using the server? Replace the engine board. See “Engine board removal”. Problem resolved. 5 Reseat the network connector. Does the error still occur when using the server? If you have the Multi-Protocol Network Card (MPC), go to step 6. If you do not have the MPC, go to step 7. Problem resolved. 6 Reinstall the Multi-Protocol Network Card. Does the error still occur when using the server? Go to step 7. Problem resolved. 7 Check the Network Settings in the Admin Menu: 1. Press System to access the menus. 2. Select Admin Menu, and press OK. 3. Select Network Settings, and press OK. Are the MFP network settings correct? Go to step 8. Set the Network Settings correctly. 8 Reinstall the RIP board. Does the error still occur when using the server? Replace the RIP board. See “RIP board removal”. Return to step 7, and recheck the network settings.