Description: Problem with the CPU Fan. CPU Fan has stopped or burnt.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the printer is unable to reboot, check the connections of the CPU Fan. • Replace the CPU Fan . • If the printer is still unable to reboot, replace the Main PCA .
Code: 05.3:10
Description: Main memory size failure. This is a service test failure and will only be displayed while in the process of testing a part.
Remedy: • Check that at least 256 megabytes of memory is installed in the Printer. • Check that the Memory Module is installed correctly. • Try installing the Memory Module in the other Memory slot and check if the system error is still displayed. • If the System Error reappears, replace the Memory Module . • If the System Error does NOT reappear, then the original slot could be faulty. In this case, replace the Main PCA
Code: 06.03
Description: NVM file has a bad CRC. NVM file has a bad CRC.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Hard Disk Drive .
Code: 06:10
Description: Main NVM failure. Main NVM failure - not detected, read/write failed or readback error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the System Error continues, replace the Hard Disk Drive .
Code: 08:11
Description: Connection problem with the Front Panel. Problem with communication between the Front Panel, the Formatter and the HDD.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • If the printer emits one or multiple fbeepsf as the printer turns On, perform the procedure fUsing the buzzer at Power-up to Troubleshootf ËPage 43. Four beeps would indicate an error with the Front Panel: • Check that the Front Panel cable is not damaged and is correctly connected to the Front Panel and to the Interconnect PCA. • Check that the Memory Module is installed correctly. • Check that the cables between the Interconnect PCA and the Main PCA are not damaged and are correctly connected. • Check that the cables between the Hard Disk Drive and the Power Supply Unit and the Main PCA are not damaged and are correctly connected. • Check that the cable between the Power Supply Unit and the Main PCA is not damaged and is correctly connected. • Check that the Printer has the latest Firmware version, if not, update the firmware to the latest version. • Replace the Interconnect PCA . • Replace the Sausalito PCI PCA .
Code: 09.01:10
Description: TOMAS Error. There is an error with the TOMAS reading. The measurements are unstable.
Remedy: • Check that TOMAS is correctly connected ËPage 32 • Replace TOMAS .