Description: Even though the machine takes a normal action, the output of the Wiper Sensor does not reach the desired value.
Causes: Disorder of Wiper Sensor Fault of Wiper Unit Fault of Wiper Sensor Cut-line or short-circuit of Cable and Flexible Cable
Remedy: Wiper Motor Replacement Wiper Unit Replacement Wiper Sensor Replacement Cable and Flexible Cable Replacement
Code: 0110
Description: Input value from Linear Encoder is not changed when Linear Encoder is setup the origin. When Motor stops during printing, Motor does not complete the movement which is supposed to be done.
Causes: Reading error of Linear Encoder. Reading error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.
Remedy: Confirm if Encoder Scale is put in the slit of Encoder Module in whole width of the machine Check Cable connection between Linear Encoder Board and Print Carriage Board Confirm connection between Belt and Head Carriage Linear Encoder replacement Scan Motor replacement Main Board replacement
Code: 0113
Description: Viscous ink stays in the Storage. (Only when BU-1 is installed.)
Causes: Printer has been idled for 2 months (56 days) or more.
Remedy: Remove viscous ink from the Storage. 6-13 : Ink Removing Procedure for Service Call 0113