OKI proColor 810
Error Codes List page 1
|
- Code: -
- Display: WDT ERROR R14=xxxx
- Description: PU firmware runaway
- Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
- Code: -
- Display: ASIC ERROR
- Description: CU board (CU) DCON access error * DCON clock output abnormity
- Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.
- Code: -
- Display: SDRAM ERROR
- Description: CU board (CU) DCON access error * RAMRD/WR abnormity for VIDEO
- Remedy: Does this error recur? Turn on the power again. Replace the CU board. Replace the PU board.
- Code: -
- Display: ABORT xxx = xxxxxxxx
- Description: PU firmware runaway
- Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
- Code: -
- Display: IRQXX_IPT
- Description: PU firmware runaway
- Remedy: Does this error recur? Yes Turn on the power again. Replace the PU board.
- Code: 001
- Display: Contact the Service center. 001: Error
- Description: Machine Check Exception
- Remedy: Replace CU board