OKI proColor 810
Error Codes List page 2
|
- Code: 002 ... 007
- Display: Reboot the printer. 002: Error ~ 007: Error
- Description: CPU Exception
- Remedy: Does the error display recur? If the RAM DIMM is installed, remove it and turn off the power of the printer and back on. Replace the CU board. Re-install the RAM DIMM. Replace the RAM DIMM.
- Code: 020
- Display: Contact the Service center. 020: Error
- Description: CU ROM Hash Check Error
- Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU
- Code: 024 ... 025
- Display: Contact the Service center. 024: Error 025: Error
- Description: CU Font ROM Hash Check Error
- Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU
- Code: 030
- Display: Contact the Service center. 030: Error
- Description: CU RAM Check Error
- Remedy: Does the error display recur? Yes Turn off the power of the printer and back on. Replace the CU board.
- Code: 031
- Display: Contact the Service center. 031: Error
- Description: CU Optional RAM Check Error
- Remedy: Is installation of the RAM DIMM normal? Does the printer recover from the error when the RAM DIMM is replaced?
Re-install the RAM DIMM. Replace the RAM DIMM. Replace the CU board.
- Code: 036
- Display: Contact the Service center. 036: Error
- Description: Slot1 RAM Spec Error
- Remedy: Is installation of the RAM DIMM normal? Does the printer recover from the error when the RAM DIMM is replaced?
Re-install the RAM DIMM. Replace the RAM DIMM. Replace the CU board.