Description: Non-continuous labels are being treated as continuous labels.
Causes: The printer is configured for continuous media. The printer was not calibrated for the media being used.
Remedy: Set the media type to noncontinuous media. See Set Media Type on page 56. Perform the calibration procedure in Calibrate Media and Ribbon Sensors on page 67.
Code: 38
Display:
Description: All lights are on, but nothing displays on the LCD, and the printer locks up.
Causes: Internal electronic or firmware failure.
Remedy: Turn the printer power Off (O) and then On (I). If the printer locks up again, replace the main logic board.
Code: 39
Display:
Description: The printer locks up while running the Power-On Self Test.