Causes: AC power source not live. Power cord not fully inserted into power source or power entry module. AC fuse blown. AC fuse blown. Power supply faulty. Main logic board failure.
Remedy: Power cord not fully inserted into power source or power entry module. Plug power cord into a live AC source. Make sure that power cord is fully inserted into the AC receptacle and the power entry module. Replace AC fuse. Replace power supply. Replace main logic board.
Code: 02
Display:
Description: All LEDs light, but nothing displays on LCD and printer does not operate.
Causes: Main logic board or Flash faulty.
Remedy: Download new Flash or replace the main logic board.
Code: 03
Display:
Description: All LEDs flash on and off.
Causes: No significant amount of DRAM tested good.
Remedy: Replace the main logic board.
Code: 04
Display:
Description: Take Label LED flashing.
Causes: Printer misconfigured for Peel-Off Mode.
Remedy: If peel-off is desired, check take label sensor.
Code: 05
Display:
Description: Printer locks up while running Power-On Self Test.