Causes: • If the actuator of the Separation base unit safety switch is not depressed.
Remedy: Close the separation fan unit.
Code: C2
Description: Close Master Making Unit
Causes: • If the actuator of the Master making unit safety switch is not depressed.
Remedy: Close the Master making unit.
Code: C3
Description: Close Master Removal Unit
Causes: • If the actuator of the Master removal unit safety switch is not depressed.
Remedy: Close the Master removal unit.
Code: C4
Description: Set master disposal box.
Causes: • If the master disposal box set sensor does not detect.
Remedy: Set the Master disposal box.
Code: C5
Description: Set Ink bottle in Place
Causes: • If the Ink bottle set sensor does not detect the Ink bottle.
Remedy: Set the Ink bottle in the Drum.
Code: C6
Description: Replace Master Roll
Causes: • If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation.
Remedy: Master making unit safety SW OFF & ON. • Replace the depleted Master roll with a new one.