Display: A01-xxx Master Mis-Feed Pull Out Master Making Unit and Rewind Master Roll, then Reset Master in Place.
Description: A01 [Master feed error]
Causes: 201 Master-positioning sensor does not go ON even after the write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 Master-positioning sensor does not go OFF even when the write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 Master-positioning sensor is ON during standby. 214 Master-positioning sensor is ON at the start of master making. 215 Even though the Write pulse motor stopped, the pulse count did not match with the programmed pulse count
Code: A02
Display: A02-xxx Master Loading Error Pull Out Print Cylinder and Discard Master.
Description: A02 [Master loading error]
Causes: 509 Master-loading sensor was OFF when the master was checked at a specified drum angle during the master-loading operation.
Code: A04
Display: A04-xxx Master Disposal Error Pull Out Print Cylinder and Discard Master.
Display: A05-xxx Master Jammed in Disposal Unit Pull Out Master Disposal Box and Remove Jammed Master
Description: A05 [Master present in the master disposal area]
Causes: 304 Master disposal box check request after master removal error or master disposal jam. 312 Master disposal jam sensor was ON at the start of the master making.
Code: A07
Display: A07 [Paper feed error]
Description: A07 [Paper feed error]
Causes: 409 Paper-ejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Paper misfeed). 412 Paper sensor was OFF when a paper misfeed was detected (paper misfeed). 418 The paper sensor was ON at the start of machine operation when the START button was pressed.
Code: A08
Display: A08 [Paper jam on print drum]
Description: A08 [Paper jam on print drum]
Causes: 410 Paper-ejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jam on the print drum).