Description: Tray 3 ~ 6 Right Side Door Open The Optional Feeder right side door switch indicates the door is open. • 01-503-00 Tray 3 Right Side door is open • 01-504-00 Tray 4 Right Side door is open • 01-505-00 Tray 5 Right Side door is open • 01-506-00 Tray 6 Right Side door is open
Causes: • MCU Board, PL10.2.18 • Right Side Door, PL12.1.14 • Right Door Switch, PL12.2.2 • Feeder Board, PL12.3.4 • Lower Option Harness, PL12.3.11
Remedy: 1 Check the switch actuator on the right side door. The right side door is undamaged. Go to Step 2. Replace the feeder. 2 Test the Right Door Switch for the affected tray using dc330: • Tray 3 (073-008) • Tray 4 (074-014) • Tray 5 (075-014) • Tray 6 (076-017) The signal changes (On/Off). Go to Step 3. Go to Step 4. 3 Check continuity of the Lower Option Harness between P/J353 on the Feeder Board and P/J360 at the switch. The harness is undamaged. Go to Step 4. Replace the Lower Option Harness. 4 Check for 3.3V at P/J353 on the Feeder Board. Is 3.3V available at J353-1? Replace the Right Door Switch. Go to Step 5. 5 Replace the Feeder Board. Does the error persist? Replace the MCU Board. Complete
Code: 01-510-00
Description: Front Door Open The Front Door Open Switch indicates the Front Door is open.
Causes: • Front Door, PL1.2.17 • Front Door Open Switch, PL1.2.3 • Front Interlock Harness, PL1.2.1 • Exit Harness, PL11.1.7 • LVPS, PL10.2.2 • MCU Board, PL10.2.18
Remedy: 1 Check the actuator on the Front Door. The door is undamaged. Go to Step 2. Replace the Front Door. 2 Test the Front Door Open Switch using dc330 (077-302). The signal changes (On/Off). Go to Step 3. Go to Step 4. 3 Check continuity of the Exit Harness between P/J20 on the MCU Board and P/J212 at the switch. The harness is undamaged. Go to Step 4. Replace the Exit Harness. 4 Check for 3.3V at P/J20-11 on the MCU Board. Is 3.3V available at JJ20-11? Replace the Front Door Open Switch. Go to Step 5. 5 Replace the LVPS. Does the error persist? Replace the MCU Board. Complete
Code: 01-520-01
Description: Right Side Door Open The Right Door Interlock Switch indicates the Right Door is open.
Causes: • Right Door Interlock Actuator, PL4.1.97 • Right Door Interlock Switch, PL4.2.96 • LVPS, PL10.2.2 • MCU Board, PL10.2.18
Remedy: 1 Check the Right Door Interlock Actuator. The actuator is undamaged. Go to Step 2. Replace the actuator. 2 Test the Right Door Interlock Switch using dc330 (077-301). The signal changes (On/Off). Go to Step 4. Go to Step 3. 3 Replace the Right Door interlock Switch. Does the error persist? Go to Step 4. Complete. 4 Replace the LVPS. Does the error persist? Replace the MCU Board. Complete
Code: 03-300-00, 303.301.01, 303.302.02
Description: XPC Failure An internal data (XPC) error was detected by the print engine. • 03-300-00 XPC Failure • 303.301.01 Serial number error • 303.302.02 XPC Failure
Causes: • MCU Board, PL10.2.18
Remedy: 1 Does the error persist after a power cycle? Go to Step 2. Complete. 2 Initialize Engine NVM using dc301. The error persists. Replace the MCU Board. Complete.
Code: 07-513-02 ... 07-513-06
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 07-513-02 Dedicated Tray 2 is open • 07-513-03 Dedicated Tray 3 is open • 07-513-04 Dedicated Tray 4 is open • 07-513-05 Dedicated Tray 5 is open • 07-513-06 Dedicated Tray 6 is open
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.
Code: 07-514-02 ... 07-514-06
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 07-514-02 Dedicated Tray 2 is open • 07-514-03 Dedicated Tray 3 is open • 07-514-04 Dedicated Tray 4 is open • 07-514-05 Dedicated Tray 5 is open • 07-514-06 Dedicated Tray 6 is open
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.