Xerox Phaser 6280

• Code: 016-610
• Description: Control Panel Language Set Unsupported The Control Panel does not support the language.
• Causes: • MCU Board, PL9.1.20
• Remedy: 1 1. Turn the printer power Off and back On. 2. Does the error still occur? Replace the MCU Board. Complete.

• Code: 016-612
• Description: MAC Address Error MAC Address error occurs.
• Causes: • Image Processor Board, PL9.1.27
• Remedy: 1 1. Reboot the printer. 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 016-718
• Description: Out of Memory The printer memory is full and cannot continue to print. Print job requires additional memory.
• Causes: • Image Processor Board, PL9.1.27 • Memory Card (Option), PL9.1.30
• Remedy: 1 1. Check the required memory for the print job. 2. Print a small size file (example as a Windows test print). 3. Does the error still occur? Go to step 2. Add memory card or separate the print job. 2 1. Reseat the memory card. 2. Does the error still occur? Go to step 3. Complete. 3 1. Check the memory card capacity. Print the printer Configuration Page: Menu > Information Pgs > Configuration. 2. Does the memory meet the print job requirements? Go to step 4. Replace the Image Processor Board. 4 1. Replace the memory card. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 016-720
• Description: PDL Error Error relating to Printer Command Language (PCL) has occurred. The print data cannot be processed by PDL.
• Causes: • Image Processor Board, PL9.1.27
• Remedy: 1 Check the print job. 1. Print a small print job (example as a Windows test print). 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 016-721
• Description: Collate Full Exceeds memory capacity.
• Causes: • Image Processor Board, PL9.1.27 • Memory Card (Option), PL9.1.
• Remedy: 1 1. Check the required memory for the print job. 2. Print a small size file (example as a Windows test print). 3. Does the error still occur? Go to step 2. Add memory card or separate the print job. 2 1. Reseat the memory card. 2. Does the error still occur? Go to step 3. Complete. 3 1. Check the memory card capacity. Print the printer Configuration Page: Menu > Information Pgs > Configuration. 2. Does the memory meet the print job requirements? Go to step 4. Replace the Image Processor Board. 4 1. Replace the memory card. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 016-741 ... 016-745
• Description: Download Error Download error has occurred because an invalid firmware was installed, the header information, checksum, or the write destination is invalid, or protecting the Flash. • Chain Link 016-741: Download Protect Error • Chain Link 016-742: Download ID Error • Chain Link 016-743: Download Range Error • Chain Link 016-744: Download Checksum Error • Chain Link 016-745: Download Header Error
• Causes: • Image Process Board, PL9.1.27
• Remedy: 1 1. Check the Image Processor Board for correct installation. 2. Is the Image Processor Board correctly installed? Go to step 2. Reseat the Image Processor Board. Go to step 2. 2 Does the error still occur when downloading the firmware? Replace the Image Processor Board. Complete.