Description: Communication error between System-CPU and Scanner-CPU
Remedy: (1) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (2) Check the version of the system ROM on the SYS board. (3) Check the version of the scanner ROM version on the SLG board. (4) Replace the SYS board. (5) Replace the SLG board.
Code: F111
Description: Scanner response abnormality
Remedy: (1) Check if the harness connecting the SYS board and SLG board is disconnected or open circuited. (2) Check the version of the system ROM on the SYS board. (3) Check the version of the scanner ROM version on the SLG board. (4) Replace the SYS board. (5) Replace the SLG board.
Code: F120
Description: Database abnormality: Database is not operating normally.
Remedy: (1) Rebuild the databases. (Perform 08-684.) (2) If the error is not recovered, initialize the HDD. (Key in “2” at 08-690.) * When “Rebuilding all databases (08-684)” is performed, all data in the Address Book and Mailbox are deleted. Make sure to back up these data in advance of rebuilding and restore the data after rebuilding.
Code: F130
Description: Invalid MAC address
Remedy: Compare the serial number of the equipment with a number displayed in 08-995. If they are different, enter the correct serial number at 08-995.
Code: F200
Description: Data overwrite kit (GP-1060) is taken off
Remedy: Clear the service call “F200”. (Key in “0” at 08-633.) * When the Data overwrite kit (GP-1060) is taken off from the equipment, the service call “F200” occurs.
Code: F350
Description: SLG board abnormality
Remedy: (1) Check if the conductor pattern on the SLG board is short circuited or open circuited. (2) Replace the SLG board.