Description: Error #U2-6120 Turn off then on Error #U2-6140 Turn off then on
Causes: LSU Motor does not work normally. / LSU Hsync signal is abnormal.
Remedy: 1) Check if the LSU harness on the main board is connected properly. 2) If it is OK, check that the LSU harness on LSU board is connected properly. 3) Check if the LSU harness is defective. 4) If the problem persists, replace the LSU. 5) If the problem persists after replacing LSU, replace the main board.
Code: U3-3313, U3-3314
Description: Document jam. Remove jam
Causes: A document jam was detected in the ADF unit.
Remedy: 1) Remove the jammed paper from ADF unit. 2) If the error persists, turn the machine off then on. 3) If the document jam occurs continually, open the ADF cover-top. Check if the ADF pick up roller is contaminated or worn out. Clean or replace it. 4) If the pick up roller is OK, check the followings. a) Check if the ADF motor is working normally. b) Check if the connector on the ADF joint board is connected correctly. 5) If the problem persists, replace the ADF unit.