Display: DC motor does not operate: #03-010. Please turn off then on
Description: DC motor for transfer belt does not operate.
Remedy: Replace the Engage motor or Engage check sensor for transfer belt.
Code: 03-011
Display: DC motor does not operate: #03-011. Please turn off then on
Description: DC motor for transfer roller does not operate.
Remedy: Replace the Engage motor or Engage check sensor for transfer roller.
Code: 04
Display: [Color] imaging unit is worn. Replace with new one
Description: The imaging unit is at the end of its life.
Remedy: Install a new Imaging unit.
Code: 04-000
Display: LSU error: #04-000. Please turn off then on
Description: LSU motor does not operate.
Remedy: Check the LSU motor noise. If there is any dirving noise, check the motor signal.
Code: 04-001
Display: LSU error: #04-001. Please turn off then on
Description: After LD on, the Laser beam detect signal is not occurred or irregular.
Remedy: 1. Check the Beam Detecht signal. If there is a BD signal, replace the Main board. If or not, check the LD contol signal. 2. Check the LD Power is normal. 3. If it is normal, check the light receving part.
Code: 04-002
Display: LSU error: #04-002. Please turn off then on
Description: LSU motor does not operate or the drive signal is abnormal.
Remedy: Check the LSU motor noise. If there is any dirving noise, check the motor ready signal.