Display: [Color] imaging unit is not installed. Install it
Description: The imaging unit is not tinstalled, or the CRUM in the cartridge is not connected.
Remedy: Check the connection between imaging unit CRUM connnector and SET.
Code: 03-000
Display: Motor does not operate: #03-000. Please turn off then on
Description: After ITB BLDC motor is operated, the ready signal is not occurred within 1 sec.
Remedy: Check the ITB waste toner is eliminated properly. If the ITB waste toner overflows, the motor error will be occurred because of increasing the torque. Replace the developing unit.
Code: 03-002 ... 03-005
Display: Fan does not operate: #03-002 ... 5. Please turn off then on
Description: Fan does not operate.
Remedy: Find out the defective FAN. Replace it.
Code: 03-006
Display: Motor does not operate: #03-006. Please turn off then on
Description: After Black OPC BLDC motor is operated, the ready signal is not occurred within 1 sec.
Remedy: Check the ITB waste toner is eliminated properly. If the ITB waste toner overflows, the motor error will be occurred because of increasing the torque. Replace the developing unit.
Code: 03-007
Display: Motor does not operate: #03-007. Please turn off then on
Description: After Color OPC BLDC motor is operated, the ready signal is not occurred within 1 sec.
Remedy: Check the ITB waste toner is eliminated properly. If the ITB waste toner overflows, the motor error will be occurred because of increasing the torque. Replace the developing unit.
Code: 03-008
Display: Motor does not operate: #03-008. Please turn off then on
Description: After Color Dev BLDC motor is operated, the ready signal is not occurred within 1 sec.
Remedy: Take out and Shake the developing unit horizontally. And reinstall it. If the problem persists, Replace the developing unit.