Causes: 410 The central transport (paper ejection) sensor was OFF at the time the paper reached the central transport (paper ejection) sensor, and the paper feed (central transport) sensor was OFF when the operation stopped (paper jam on print drum). 421 The paper feed sensor was ON when extra-long paper left the paper feed sensor in the extra-long paper mode (paper length longer than 555 mm). 430 Paper jam on print drum (for recovery).
Remedy:
Code: A09
Description: Paper ejection error
Causes: 411 The paper ejection sensor was ON when the paper left the paper ejection sensor. 417 The paper ejection sensor was ON at the start of the operation. 431 Paper ejection error (for recovery).
Remedy:
Code: A10
Description: AF original feed error
Causes: 102 Original jam error resulting from pulled-out original. • The original IN sensor switched OFF while the original registration sensor and the original IN sensor were ON during scanning. • The paper ejection sensor switched OFF before completion of scanning (prior to SIG_C output). • The original registration sensor switched OFF from the time of completion of leading edge insertion operation to the time of scanning start. * Issued by AF. 103 Original jam at the AF registration sensor (extra-long paper error). The original registration sensor fails to switch OFF after the original IN sensor switched ON (max: movement of 486 mm). * Issued by AF. 105 Original jam at the original IN sensor The original IN sensor fails to switch OFF after the original registration sensor switched OFF (max: movement of 84 mm). * Issued by AF. 106 Original jam at the original OUT sensor The original OUT sensor fails to switch OFF after the original IN sensor switched OFF (max: movement of 86 mm). * Issued by AF. 107 Original registration sensor non-arrival jam Paper fails to reach the original registration sensor after the feed operation started (max.: movement of 103 mm). * Issued by AF. 108 Original IN sensor non-arrival jam Paper fails to reach the original IN sensor after the scanning operation started (max.: movement of 42 mm). * Issued by AF. 109 Original OUT sensor non-arrival jam Paper fails to reach the original OUT sensor after the original IN sensor switched ON (max.: movement of 86 mm). * Issued by AF. 169 The AF opens and triggers an error while a master is in the AF.
Remedy:
Code: A16
Description: Awaiting removal of master from first print drum side
Causes: 525 Waiting for master to be removed.
Remedy: First print drum connection signal: ON -> OFF and first print drum safety SW: ON -> OFF << Pull out the print drum to cancel the error. >> * If the print drum is at position B when this error occurs, the print drum lock is automatically released.
Code: A17
Description: A17 [Cutter error]
Causes: 209 The cutter home position switch is OFF when the machine enters standby, at the start of the mastermaking operation, or when the master material is set.
Remedy: Master-making unit sensor: OFF -> ON and Master detection sensor: OFF << When the master making unit cover is closed without a master, the error is cancelled. >>
Code: A25
Description: Central transport error
Causes: 419 The central transport sensor was ON at the start of the operation. 440 The central transport sensor was OFF at the time the paper reached the central transport sensor (central transport error). 441 The central transport sensor was ON at the time the paper left the central transport sensor (central transport error). 447 The central transport sensor was ON when the paper reached the central transport sensor, and the central transport sensor was OFF when the operation stopped (central transport error).