Causes: 311 The master disposal software counter counted maximum. (Master disposal box full by the software count.)
Remedy: Remove master disposal box from the machine, throw away the disposed master from the disposal box and return the disposal box in the machine after an interval of over 5 seconds.
Code: D01
Description: Print drum not set
Causes: 526 Print drum is not set in the machine (drum connection signal, drum safety switch, and drum set sensor are OFF.) 527 Print drum connection signal is OFF when the print drum was inserted in the machine. 528 Print drum safety switch is OFF when the print drum was inserted in the machine.
Remedy: Set the print drum in the machine.
Code: D03
Description: Ink cartridge not set
Causes: 533 Ink bottle set switch is OFF.
Remedy: Install ink cartridge in the print drum.
Code: D04
Description: Incorrect ink cartridge
Causes: 534 Incorrect ink cartridge is used. 560 Ink RF-Tag is not detected on ink bottle. 561 Ink RF-Tag communication error (communication with the ink cartridge was interfered by noise). 562 Incorrect information on the Ink RF-Tag. 564 Detected a mismatch in the Ink RF-Tag serial number. 575 RF-Tag software error.
Remedy: Replace with correct ink cartridge.
Code: D05
Description: Master not set
Causes: 237 Master RF-TAG missing
Remedy: Insert leading edge of the master material into the master entrance and close the master making unit.
Code: D06
Description: Paper separation unit not set
Causes: 4 27 Paper separation unit safety switch is OFF.
Remedy: Set the Paper separation unit in place so the sfety switch is pressed.