Ricoh MP6000

• Code: 953
• Description: Scanner image setting error
  The settings required for image processing using the scanner are not sent from the IPU.
• Causes: • Software defective

• Code: 954
• Description: Printer image setting error
  The settings required for image processing using the printer controller are not sent from the IPU.
• Causes: • Software defective

• Code: 955
• Description: Memory setting error
  The settings that are required for image processing using the memory are not sent from the IPU.
• Causes: • Software defective

• Code: 964
• Description: Printer ready error
  The print ready signal is not generated for more than 17 seconds after the IPU received the print start signal.
• Causes: • Software defective

• Code: 984
• Description: Print image data transfer error
  After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s.
• Causes: • Controller (SIMAC) board defective
  • BICU defective
  • BICU - controller disconnected

• Code: 985
• Description: Scanned image data transmission error
  After a data transfer begins from the engine to the controller via the PCI bus, the transfer does not end within 3 s.
• Causes: • Controller (SIMAC) board defective
  • BICU defective
  • BICU - controller disconnected