Description: Software continuity error
The software attempted to perform an unexpected operation. However, unlike SC990, the object of the error is continuity of the software.
Causes: - No operation required. This SC code does not appear on the panel, and is only logged.
Code: 992
Description: Unexpected Software Error
Software encountered an unexpected operation not defined under any SC code.
Causes: - Software defective
- An error undetectable by any other SC code occurred
Code: 997
Description: Application function selection error
The application selected by a key press on operation panel does not start or ends abnormally.
Causes: - Download the firmware for the application that failed
- An option required by the application (RAM board) is not installed
Code: 998
Description: Application start error
After power on, the application does not start within 60 s. (All applications neither start nor end normally.)
Causes: - Download controller firmware
- Replace the controller board
- An option required by the application (RAM board) is not installed
Code: 999
Description: Program download error
The download (program, print data, language data) from the IC card does not execute normally.
Causes: - Board installed incorrectly
- BICU board defective
- Controller board defective
- IC card defective
- NVRAM defective
- Loss of power during downloading
- Important Notes About SC999
- Primarily intended for operating in the download mode, logging is not performed with SC999.
- If the machine loses power while downloading, or if for some other reason the download does not end normally, this could damage the controller board or the PCB targeted for the download and prevent subsequent downloading. If this problem occurs, the damaged PCB must be replaced.