-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Ricoh MP2000
Error Codes List page 11
|
|
- Code: 828
- Description: Self-diagnostic Error: ROM
The resident read-only memory returned an error during the self-diagnostic test.
- Causes: - Controller board defective
- Download controller firmware again
- Code: 829
- Description: Self-diagnostic Error: Optional RAM
The optional RAM returned an error during the self-diagnostic test
- Causes: - Replace the optional memory board
- Controller board defective
- Code: 838
- Description: Self-diagnostic Error: Clock Generator
A verify error occurred when setting data was read from the clock generator via the I2C bus
- Causes: - Replace the controller board
- Code: 850
- Description: Network I/F Abnormal
NIB interface error.
- Causes: - NIB defective
- Controller board defective
- Code: 857
- Description: USB I/F Error
USB interface error detected.
- Causes: - Defective controller
- Code: 900
- Description: Electrical total counter error
The electrical total counter does not work properly.
- Causes: - NVRAM on the GDI controller board defective