Description: Network, DIMM or hard disk failure This SC occurs if auto firmware decompression fails after downloading the package firmware during auto firmware update, update from the application site, or receiving reservation setting in SFU.
Causes: Failure in the customer’s network or hardware (DIMM or hard disk) failure.
Remedy: 1. This may be recovered by retrying the firmware update. 2. If the problem persists, replace the DIMM on the controller board. 3. If the problem persists after replacing the DIMM, replace the hard disk.
Code: SC851-00
Description: IEEE 1394 I /F error IEEE 1394 I/F cannot be used due to a driver error.
Causes: • HY, LINK Module malfunction • PCI Interface malfunction
Remedy: 1. Confirm the IEEE 1394 connection. 2. Replace the IEEE 1394 interface board. 3. Replace the controller board.
Code: SC855-01
Description: Wireless LAN board error (driver attachment failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: 1. Turn the main power OFF/ON. 2. Replace wireless LAN board
Code: SC855-02
Description: Wireless LAN board error (driver initialization failure) Wireless LAN board error (wireless LAN card: 802.11 is covered)
Causes: • Defective wireless LAN board • Loose connection
Remedy: 1. Turn the main power OFF/ON. 2. Replace wireless LAN board
Code: SC857-00
Description: USB I/F Error The USB interface is unusable because of a driver error.
Causes: USB driver error (There are three causes of USB error: RX error/CRC error/STALL. SC is issued only in the case of STALL.)
Remedy: Replace the controller board.
Code: SC858-00
Description: Data encryption conversion error (Key Setting Error) A serious error occurred during an attempt to update the encryption key.
Causes: • USB Flash, other data, corrupted • Communication error caused by electrostatic noise • Controller board defective