Description: Application Function Selection Error The application did not function normally after pressing the application key on the operation panel
Causes: There is a bug in the software.
Remedy: • Check if the options required by the application (RAM, DIMM, boards) are installed properly. • Check whether downloaded applications are correctly configured.
Code: SC998-00
Description: Application Start Error • After power ON, no application program was registered to the system within the specified period of time. (No application started or ended normally.). • Even though the application started up, it cannot be rendered due to an unknown fault.
Causes: • There is a bug in the software. • The options required by the application (RAM, DIMM, board) are not installed.
Remedy: • Turn OFF then ON the main power. • Check the RAM, DIMM, and boards. • Check the application configurations. • Replace the controller board.