Description: Hard disk connection error
The connection of the optional HDDs could not be confirmed.
Causes: • Hard disk connectors disconnected. • Hard disk defective. • IPU board defective
Code: SC361
Description: Hard disk read error
Causes:
Code: SC362
Description: IMAC (Image Memory Access Controller) error
At the IPU, an error was detected during data compression with the GAIMAC ASIC or during data transfer to memory.
Causes: • Software error, IPU defective. Update the firmware. If this does not solve the problem, replace the IPU board.
Code: SC365
Description: Image processing parameter error
An image processing data file not stored in the memory was required when writing started due to software error.
Causes: Software error. Replace software (all three firmware modules).
Code: SC391
Description: Development bias error
A development bias feedback voltage of less than 0.25V was detected for more than 200 ms while the PWM duty value was more than 1% (development bias leak).