PrintCopy.info service

Panasonic DPC263

Error Codes List page 1

  • Code: E1-01
  • Description: Abnormal Platen Glass scanning
  • Causes: 1. Home Position Sensor connector is disconnected. 2. Home Position Sensor is defective. 3. Scanner Motor connector is disconnected. 4. Scanner Motor is defective. 5. Scanning Mechanism is defective. 6. SCN PCB connector is disconnected. (Check CN710/709 & 703) 7. SCN PCB is defective. (Check Fuse F1& F3) 8. LVPS1 connector is disconnected. (Check CN702)
  • Code: E1-22
  • Description: Polygon Motor synchronization
  • Causes: 1. Polygon Motor connector is disconnected. (Check CN3) 2. EC PCB connector is disconnected. (Check CN701) 3. LSU Relay Harness connector is disconnected. 4. Polygon Motor is defective. 5. LVPS1 is defective. (+24 V) 6. EC PCB is defective. (+24 V Circuit is defective)
  • Code: E1-23
  • Description: LSU Shutter Error
  • Causes: 1. LSU Shutter Sensor is defective. 2. LSU Shutter Sensor connector is disconnected. 3. LSU Shutter Drive is defective. 4. LSU Shutter Mechanism is defective.
  • Code: E1-31
  • Description: Scanning Lamp (Does not turn On)
  • Causes: 1. Scanning Lamp Inverter PCB connector is disconnected. 2. Scanning Lamp Inverter PCB is defective. 3. Scanning Lamp is defective. 4. SCN PCB connector is disconnected. (Check CN704/709) 5. SCN PCB is defective. (Check Fuse F1) 6. LVPS1 connector is disconnected. (Check CN702) 7. SC PCB connector is disconnected. (Check CN56/57) 8. CCD PCB is defective.
  • Code: E1-45
  • Description: LSU Fan Rotation
  • Causes: 1. LSU Fan connector is disconnected. 2. LSU Fan is defective. 3. EC PCB connector is disconnected. 4. EC PCB is defective.
  • Code: E1-60
  • Description: Beam Detect (Y) Error
  • Causes: 1. LSU is defective. 2. EC PCB is defective. 3. LSU - EC PCB Harness is defective. 4. LSU or EC PCB connector is disconnected.
  • Code: E1-61
  • Description: Beam Detect (M) Error
  • Causes: 1. LSU is defective. 2. EC PCB is defective. 3. LSU - EC PCB Harness is defective. 4. LSU or EC PCB connector is disconnected.
  • Code: E1-62
  • Description: Laser (Y) Error
  • Causes: 1. LSU is defective. 2. EC PCB is defective. 3. LSU - EC PCB Harness is defective. 4. LSU or EC PCB connector is disconnected.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us