Description: Duplex FANO Alarm Detection FAN error inside the Duplex. Is the error issued again
Remedy: FAN error inside the Duplex. Is the error issued again when the power is turned on again? Check to see if the Duplex is properly installed. Check to see if the FAN is properly connected. Replace the FAN.
Code: 923
Display: Power off/on 923:Error
Description: Black Image Drum Lock Error The black image drum (K-ID) does not rotate properly. Is the error message issued again
Remedy: The black image drum (K-ID) does not rotate properly. Is the error message issued again when the power is turned on? Check to see if the K-ID is properly installed. Replace the K-ID. Replace the K-ID motor.
Code: 928
Display: Service call 928:Error
Description: Fuser Motor Lock Error The fuser does not rotate properly. Is the error message issued again
Remedy: The fuser unit does not rotate properly. Does the error reoccur after power cycling? Check to see if the fuser unit is properly installed. Replace the fuser unit. Replace the fuser motor.
Code: 980
Display: Service call 980:Error
Description: Error by media clinging to the fuser Media has clung to the fuser.
Remedy: Media has clung to the fuser. Power OFF Replace the fuser unit.
Description: An error was detected of the CU program.
Remedy: Reinstall the CU board. Is the error message displayed again? After turn power OFF, check connections between CU board and PU board. Then turn power ON again.