OKI C8600
Error Codes List page 1
|
- Code: -
- Display: SDRAM ERROR
- Description: PU board SRAM error
- Remedy: Does error reoccur? Yes Turn on the printer again. Replace the PU board.
- Code: -
- Display: CRC CHECK NG
- Description: A PU download data CRC check error.
After PU data (PU firmware, custom media data and LED head adjustment data) downloading, a CRC check error was detected. - Remedy: Turn on the printer again and redownload the data (during usual printer operation, the downloading is not performed and the error does not occur).
- Code: -
- Display: LOADER VERSION
- Description: PU board Flash ROM hash check error
- Remedy: Does error reoccur? Yes Turn on the printer again. Replace the PU board.
- Code: -
- Display: WDT ERROR
- Description: PU firmware went haywire.
- Remedy: Does error reoccur? Yes Turn on the printer again. Replace the PU board.
- Code: -
- Display: COMMUNICATION ERROR
- Description: An error in a PUCU interface.
- Remedy: Is the CU assy installed properly? Does the printer recover from the error by replacing the CU board.
Reinstall the assy properly. Remove the CU option(s) as a trial. Replace the CU board. Replace the PU board.
- Code: 002 ... 005
- Display: POWER OFF/ON 002:Error ~ 005:Error
- Description: CPU Exception
- Remedy: Does error display reappear? Yes Replace the CU PCB.