PrintCopy.info service

OKI C3530 MFP

Error Codes List page 1

  • Code: 002 ... 005
  • Display: Service call 002: Error - 005: Error
  • Description: CPU Excepption
  • Remedy: Is the error message displayed again?
    If the RAM DIMM is mounted, remove it and turn the power supply off/ON. Replace M32 board Remount RAM DIMM Replace RAMDIMM
  • Code: 030
  • Display: Service call 030: Error
  • Description: CU RAM Check Error
  • Remedy: Is the error message displayed again? Yes Power supply OFF/ON Replace M32 board
  • Code: 031
  • Display: Service call 031: Error
  • Description: CU Optical RAM Check Error
  • Remedy: Is RAM DIMM mounted normally? Does it restore by exchanging RAM DIMM?
    Remount RAM DIMM Replace RAMDIMM Replace M32 board
  • Code: 040
  • Display: Service call 040: Error
  • Description: CU EEPROM Error
  • Remedy: Is the error message displayed again? Yes Power supply OFF/ON Replace M32 board
  • Code: 041
  • Display: Service call 041:Error
  • Description: CU Flash Error Flash ROM Error on the CU board
  • Remedy: Is the error message displayed again? Yes Power supply OFF/ON Replace M32 board
  • Code: 042, 043
  • Display: Service call 042: Error - 043: Error
  • Description: Flash File System Error
  • Remedy: It failed to the access to CU Flash ROM that is attached to the M32 board directly. The compulsive initialization of Flash is done. (Because NICFirmware is deleted, please be careful to it. After initialization, it is necessary to write NIC-Firmware by the maintenance utility).FLASH FORMAT is executed by using the maintenance utility.If the symptom doesn't change, replace the M32 board.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us