Display: 1. [KCMY] Ink Near End 2. [KCMY] Ink End The ink color that is/are subject to this caution is/are displayed in the [ ].
Description: 1. Ink is running short. Printing is possible. 2. Ink has run out. Any printing operation stops immediately.
Remedy: 1. Check which cartridge has no ink from "Sen: Ink NOT" of self-diagnosis function. Remove all cartridges and lightly push the black resin lever of ink sensor Assy (K, C, M, Y) to check that the display of "Sen: Ink NOT" changes. 2. Check contact of the ink sensor Assy . Reconnect following connectors. • connector18(K) • connectorJ9(C) • connectorJ10(M) • connectorJ11(Y) 3. For the ink color that is displayed as "Ink Near End" or "Ink End", switch ink sensor Assy connector with that of normally displayed ink color. • If ink color display changes after replacing connector: Ink sensor Assy is damaged. Replace ink sensor Assy . • If ink color display does not change after replacing connector: MAIN board Assy may be damaged.Replace MAIN board Assy.
Code: n06
Display: [KCMY] No Cartridge
Description: Cartridge is not installed.
Remedy: Turn machine OFF. Turn it ON again and check if the same message appears. If message appears: Refer to action in check item No. 2. 2. Check presence of ink cartridge from "Sen: Ink NOT" of selfdiagnosis function. Remove all cartridges and lightly push the switch of ink NOT sensor Assy (K, C, M, Y) with something with a flat tip such as ballpoint pen to check that the display of "Sen: Ink NOT" changes. 3. Check contact of ink sensor Assy connector. Reconnect following connectors. • connector 15(K) • connector J6(C) • connector J7(M) • connector J8(Y) 4. For the ink color that is displayed as "No cartridge", switch ink sensor Assy connector with that of normally displayed ink color. If ink color displayed as "No cartridge" changes after replacing connector: Ink sensor Assy is damaged. Replace ink sensor Assy.
Code: n07
Display: Life Times [Head]
Description: The operational life of Print head has almost expired.
Remedy: Check the condition of Head. Replace Head as necessary. Clear the counter after replacing it.
Code: n08
Display: Life Times [PF Motor]
Description: The operational life of PF motor has almost expired.
Remedy: The operational life of PF motor has almost expired. Replace PF motor as necessary. Clear the counter after replacing it.
Code: n09
Display: Life Times [CR Motor]
Description: The operational life of CR motor has almost expired.
Remedy: Check the condition of CR motor. Replace CR motor as necessary. Clear the counter after replacing it.
Code: n10
Display: Life Times [Pump]
Description: The operational life of Pump has almost expired.
Remedy: Check the condition of Pump. Replace Pump as necessary. Clear the counter after replacing it.