Description: Overload condition in CR motor (Yaxis) during plotter operation.
Remedy: 1. Check error history from "Test: Elec." of self-diagnosis function. 2. Move carriage in both directions while the plotter is turned off, and check if there is any position where carriage does not move smoothly. 3. Set the number of endurance running cycles to 50 or more from "Life: CR motor" of selfdiagnosis function, and check if "Y motor error" occurs. - • Clean and lubricate CR rail roller guide. • Check connection of following connectors. Main board: • CR motor assembly connector: J106 • CR cable connector: J110 - J114 CR board: • CR cable connector: J201 - J205 • TF_ENC assembly connector: J210 4. Check if T fence is contaminated or worn out. • If grease or dust collect: Wipe fence with a dry cloth. • If ink deposit presents: Wipe it off with cloth dampened with neutral detergent. • If contamination or deposit is too heavy: Replace T fence. 5. Check "Y Encoder" from "Test: Encoder" of selfdiagnosis function. a) If NG: Check following cable connection. • CR board assembly connector J210 b) Replace following parts. • T fence • CR motor assembly • CR board assembly • CR cable • Replace main board assembly. 6. Main board assembly may be damaged.
Code: E097
Display: E097 error NVRAM
Description: Abnormal condition in NVRAM.
Remedy: Replace main board assembly.
Code: E129
Display: E129 error NVRAM
Description: Abnormal condition in NVRAM in main board assembly that memorizes product settings.
Remedy: Main board assembly may be defective. Replace main board assembly.
Code: E161
Display: E161 error Y life
Description: Carriage motor has reached the end of life.
Remedy: 1. Turn machine OFF. Turn it ON again and check if the same message appears. If message appears: Refer to action in check item No. 2. 2. The number of endurance running cycles of carriage motor has reached the specified value. Replace Carriage motor 3. Main board assembly may be damaged. Replace main board assembly.
Code: E237
Display: E237 error Transfer memory
Description: Transfer memory error: Abnormal condition in transfer of analyzed plotter data.
Remedy: 1. Check AC power supply and plotter surrounding equipment. 2. Check reappearance by turning ON/OFF the machine power several times. Make sure to perform this check repeatedly even if no problems seem to be present. (Make the same condition as user's.) 3. Check serial number of the plotter. • Contact our customer support center. 4. Main board assembly may be defective. • Replace main board assembly.
Code: I05
Display: I 05 error command [ ]
Description: Sum check error
Remedy: 1. Attempt communication using PC and cable on hand. 2. Is there any error statement in printing data? 3. Does the symptom remain the same even if application driver is replaced? 4. Main board assembly may be defective. • Contact our customer support center. • Replace application driver. • Obtain printing data. • Contact our customer support center. • Replace main board assembly.