PrintCopy.info service

Mimaki JV400-160SUV

Error Codes List page 22

  • Code: na17
  • Display: <LOCAL> DATA REMAIN
  • Description: Data has already been received.
  • Remedy: Press the REMOTE key and perform printing. Or, perform data clear.
  • Code: na18
  • Display: <LOCAL> INK NEAR END [ENT]
  • Description: Ink near end (A small amount of ink left)
  • Remedy: Press the [ENTER] key and check the relevant cartridge. (Be careful that ink end is coming soon.)
  • Code: na19
  • Display: <LOCAL> SUPPLY INK :MMCCYYKK
  • Description: Ink filling into the damper has failed.
  • Remedy: 1. Perform [ MAINTENANCE DAMPER ]. 2. Also check the amount of remaining ink in the cartridge.
  • Code: na20
  • Display: <LOCAL> Damper Sens:MMCCYYKK
  • Description: The liquid surface sensor abnormality of the damper has been detected.
  • Remedy: 1. Turn OFF the power supply once, and wait for a while. And then turn ON the power supply again (when it is displayed again). Same as ERROR617.
  • Code: na21
  • Display: <LOCAL> InkOverflow:MMCCYYKK
  • Description: Overflow from the damper has been detected.
  • Remedy: 1. Perform [ MAINTENANCE DAMPER ] (when it is displayed again). Same as ERROR61a.
  • Code: na22
  • Display: <LOCAL> Damper HIGH:MMCCYYKK
  • Description: Even though a certain amount of ink has been consumed, there is no change in the liquid level detection sensor “High”.
  • Remedy: Perform [ MAINTENANCE DAMPER ] (when it is displayed again). Same as ERROR618,619.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us