-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Mimaki JV400-160SUV
Error Codes List page 19
|
|
- Code: 910
- Display: SYSTEM HALT (*) 910 : DEVICE CONST
- Description: Device configuration is wrong.
- Remedy: 1. Check whether or not FW is correct for using device.
- Code: 911
- Display: ERROR 911 ENVIRONMENT TEMP(HI)
- Description: The room temperature is high. It is possible that normal discharging cannot be performed.
- Remedy: Adjust the room temperature to the specified range (20 degrees C to 25 degrees C).
- Code: na01
- Display: <LOCAL> INK IC CAN'T READ
- Description: IC chip of Ink Cartridge unreadable properly
- Remedy: 1. Check the attached status of the chip. 2. Perform #TEST/ Check the IC. 3.Replace the ID Contact PCB Assy. with a new one.
- Code: na02
- Display: <LOCAL> WRONG INK IC
- Description: IC chip of Ink Cartridge unreadable properly
- Remedy: 1. Check the attached status of the chip. 2. Perform #TEST/ Check the IC. 3.Replace the ID Contact PCB Assy. with a new one.
- Code: na03
- Display: <LOCAL> INK TYPE
- Description: Type of inserted Ink Cartridge is different.
- Remedy: 1. Check the type of the ink cartridge.
- Code: na04
- Display: <LOCAL> INK COLOR
- Description: The color of Ink Cartridge inserted is different from the color to be set.
- Remedy: 1. Check the color of the ink cartridge.