Description: Received data does not follow the command system set in the device.
Remedy: Transmit data with the command system corresponding to the system. 1. Make sure that the transmission data is in MRL-III command system (data ripped for JV-33). 2. Check the command system set with [MACHINE SETUP] - [MRL COMMAND].
Code: 200
Display: HEAD MEMORY (----)
Description: An error occurred in head unit memory.
Remedy: Turn the main power OFF and turn the main power ON after elapse of 2~3 minutes. In a case of recurrence, contact your local distributor to call for service. 1. Check the head memory cable. 2. Replace the head memory with a new one. 3. Replace the ink slider PCB with a new one. 4. Replace the main PCB with a new one.
Code: 211
Display: HeaterTEMP (--/--/--)
Description: An abnormal temperature of the media heater is detected.
Remedy: 1. Replace the main PCB with a new one. 2. Replace the power supply PCB with a new one. 3. Replace the corresponding platen cover with a new one.
Code: 211
Display: HeadWARM. TEMP. (----)
Description: An abnormal temperature of the head heater was detected.
Remedy: 1. Make sure that the connection to the main FPC is correct. 2. Replace the corresponding head heater with a new one. 3. Replace the ink slider PCB with a new one.
Code: 211
Display: HeadWARM. BREAK(----)
Description: The head heater is disconnected.
Remedy: 1. Make sure that the connection to the main FPC is correct. 2. Replace the corresponding head heater with a new one. 3. Replace the ink slider PCB with a new one.
Code: 211
Display: HeadWARM. THERM(----)
Description: Trouble has occurred with the thermistor of the head heater
Remedy: 1. Make sure that the connection to the main FPC is correct. 2. Replace the corresponding head heater with a new one. 3. Replace the ink slider PCB with a new one.