Mimaki JV33-160

• Code: 01
• Display: MAIN ROM
• Description: An error occurred on the control circuit board. (ROM)
• Remedy: 1. Replace the main PCB with a new one.

• Code: 02
• Display: MAIN RAM
• Description: An error occurred on the control circuit board. (RAM)
• Remedy: 1. Replace the main PCB with a new one.

• Code: 03
• Display: POWER +5V
• Description: An error occurred on the control circuit board. (Power supply voltage +5V)
• Remedy: 1. Replace the power supply PCB with a new one. 2. Replace the main PCB with a new one.

• Code: 03
• Display: POWER +24V
• Description: An error occurred on the control circuit board. (Power supply voltage +24V)
• Remedy: 1. Replace the power supply PCB with a new one. 2. Replace the main PCB with a new one.

• Code: 03
• Display: POWER +42V
• Description: An error occurred on the control circuit board. (Power supply voltage +42V)
• Remedy: 1. Replace the power supply PCB with a new one. 2. Replace the main PCB with a new one.

• Code: 04
• Display: FLASH ROM
• Description: An error occurred on the control circuit board. (Parameter ROM)
• Remedy: 1. After uploading parameters, initialize all parameters. * If the state is not restored, replace the main PCB with a new one.