PrintCopy.info service

Mimaki JFX200-2513

Error Codes List page 1

  • Code: 000
  • Display: SYSTEM HALT (*) 000 : UNNOWN ERR
  • Description: Unnown error
  • Remedy: 1.Update F/W. 2. Check and clear the parameter. 3. Replace the main PCB with a new one.
  • Code: 04
  • Display: ERROR 04 PARAM ROM
  • Description: Access Error of the PARAMETER ROM 1.The state that cannot access “FROM” on the MAIN PCB. 2.The state that cannot access “EEPROM” on the Central-IO PCB.
  • Remedy: 1. Replace the FFC and cable located between the HDC PCB and the MAIN PCB. 2. Replace the FFC and cable located between the HDC PCB and the MAIN PCB. 3. Replace the Central-IO PCB with a new one. 4. Replace the MAIN PCB with a new one.
  • Code: 104
  • Display: SYSTEM HALT (*) 104 : +35V RECVR
  • Description: 35 V Power recovery error
  • Remedy: 1. Replace the DC power supply (36V) PCB with a new one. 2. Replace the main PCB with a new one.
  • Code: 108
  • Display: ERROR 108 HD CONNECT[12345678]
  • Description: Head connection error (Head connection can not be confirmed)
  • Remedy: 1. Check connection between the HDC PCB from the Print Head 2. Replace the HDC PCB with a new one. 3 3.Replace the print head with a new one.
  • Code: 10e
  • Display: SYSTEM HALT (*) 10e :FROM CLEAR
  • Description: F-ROM CLEAR error (F-ROM clear unable) F-ROM is not clearable on parameter writing, FW down loading and log clearing. (fls_secclr)
  • Remedy: 1. Execute the memory check (F-ROM) of [#TEST]. 2. Upload the parameter and initialize all parameters with [#PARAMETER]. 3. Replace the main PCB with a new one.
  • Code: 10f
  • Display: SYSTEM HALT (*) 10f : FROM WRITE
  • Description: FROM WRITE error (F-ROM writing unable) F-ROM is not clearable on parameter writing, FW down loading and log clearing. (fls_secclr)
  • Remedy: 1. Execute the memory check (F-ROM) of [#TEST]. 2. Upload the parameter and initialize all parameters with [#PARAMETER]. 3. Replace the main PCB with a new one.
  • Code: 110
  • Display: SYSTEM HALT (*) 110 : PCB KEY
  • Description: No keyboard PCB
  • Remedy: 1. Check the connections between the keyboard PCB and the main PCB and then disconnect and connect the FFCs. 2. Replace the FFCs of the above routes. 3. Replace the keyboard PCB with a new one. 4. Replace the main PCB with a new one.
  • Code: 115
  • Display: SYSTEM HALT (*) 115 : PCB MAIN-F1
  • Description: The F1 fuse on the MAIN PCB went out.
  • Remedy: 1. Replace the MAIN PCB with a new one.
Service manual
Error Code
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us