Causes: Registration mark detection failed during registration mark detection and continuous copy operation. CGFX places priority on continuous operation and, therefore, does not display an error when registration mark detection fails during copy operation. It simply skips a pattern and shifts to registration mark detection of the next pattern.
Remedy: No action is needed as this error message appears only momentarily when skipping a pattern. If skip occurs frequently, verify the registration mark detection operation in reference to ERR36 MARKdetect.
Code: n08
Display: * * END COPY * *
Description: Sheet cutting ended
Causes: Operation ended after a single copy as No. COPIES does not apply to the specific data.
Remedy: An origin update command (!PG;,ZT;) is included in the data, so “No. COPIES” that will make effective use of the sheet is not possible.
Code: n09
Display: SHEET EXCHANGE
Description: Waiting for sheet exchange
Causes: This message appears when waiting for sheet exchange during COPIES operation in registration mark detection in Leaf Mode.
Remedy: Raise the lever, exchange sheet and lower the lever again. The system automatically detects sheet under the same condition as before and continues continuous copying and ends automatically after the specified number of copies.
Code: n10
Display: VER-UP INITIAL
Description: Initializing after version upgrade
Causes: This message appears momentarily at first power on after the firmware upgrade. It remains while version data is being written or the servo parameters are being initialized.
Remedy: This is not an error, so no action is needed. The program will start normally as soon as upgrade processing completes.
Code: n11
Display: END > POWER OFF
Description: End of Parameter Upload/Download Mode
Causes: Parameter upload/download has completed and the system is waiting for power OFF.
Remedy: Turn power OFF immediately. No other action is possible.
Code: n12
Display: * * MARK DETECT * *
Description: Displayed during registration mark detection
Causes: Registration mark detection is in progress.
Remedy: This is not an error, so no action is needed. The message will change as soon as detection is completed.