Description: Hard disk recovered (requiring reboot) HDD is damaged.
Causes: Hard disk
Remedy: 1 Turn OFF/ON the main power switch. - - 2 If the above actions do not solve the problem, contact KM.
Code: D096
Description: Hard disk access fault HDD is damaged.
Causes: Hard disk
Remedy: 1 Replace the hard disk. - - 2 Format hard disk.
Code: D3A0, D3A2
Description: Counter error A write error occurs in the counter area.
Causes: MFP board (MFPB)
Remedy: 1 Check the MFPB for its mounting condition and correct any faulty condition. - - 2 Replace MFPB - - 3 If the same trouble code persists after the abovementioned procedures, the EEPROM is probably damaged.
Code: D3F1
Description: Successful completion of counter backup The counter backup process is completed successfully.
Causes:
Remedy: 1 This code is displayed when the counter backup process is completed successfully. When this code is displayed, turn OFF/ON the power switch and then perform the given steps. G.4.3.2 MFP board (MFPB)
Code: D3F4
Description: Abnormal end of counter backup The counter backup process results in an abnormal end due to a write error or other reasons.
Causes: MFP board (MFPB)
Remedy: 1 Reboot the main body. - - 2 Check the MFPB connector for proper connection and correct as necessary. - - 3 Change MFPB. - - 4 After taking the above actions, if the counter backup process results in the same trouble code again, the EEPROM can be broken. In this case, the counter backup is unavailable.
Code: D501
Description: FLASH error The SSD board (SSDB) develops a fault.
Causes: • MFP board (MFPB) • SSD board (SSDB)
Remedy: 1 Check the SSD for its mounting condition and correct any faulty condition. - - 2 Replace MFPB