PrintCopy.info service

Konica-Minolta bizhub C250i

Error Codes List page 3

 All About this machine
  • Code: 32-01, 32-05, 32-06
  • Description: Misfeed at fusing/paper exit section
    32-01 The leading edge of the paper is not turned ON (unblocked) the ADU paper passage sensor/1 (PS40) even after the lapse of a given period of time after the reverse sequence is started.
    32-05 The paper exit sensor (PS3) is not turned OFF (blocked) even after the lapse of a given period of time after the leading edge of the paper has turned ON (unblocked) PS3.
    32-06 The paper exit sensor (PS3) is not turned ON (unblocked) even after the lapse of a given period of time after the leading edge of the paper has turned ON (unblocked) the fusing loop sensor (PS2).
    - Paper jam of a sheet of paper left at the paper exit section results, if the paper exit sensor (PS3) is turned ON (unblocked) when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the paper exit section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Transport motor (M1) • Fusing motor (M3) • Paper exit/reverse motor (M4) • ADU transport motor (M5) • Fusing loop sensor (PS2) • Paper exit sensor (PS3) • ADU paper passage sensor/1 (PS40) • Exit path switch solenoid (SD3) • Expansion control board (EXCB) • Base board (BASEB)
  • Remedy: 1 Initial check items - - 2 PS2 I/O check, sensor check EXCB CN13EX-6 (ON) 4-C 3 PS3 I/O check, sensor check BASEB CN22E-3 (ON) 11-C 4 PS40 I/O check, sensor check BASEB CN22E-6 (ON) 11-C 5 SD3 load check • Check code: 83 • Multi code: 0 BASEB CN13E-7 (24V) 12-C 6 M1 load check • Check code: 40 • Multi code: 1, 4, 5 BASEB CN19EA-1 to 5 1-C 7 M3 load check • Check code: 45 • Multi code: 1, 4, 5, 6 BASEB CN19EA-6 to 10 1-C 8 M4 load check • Check code: 84 • Multi code: 1, 4, 5, 6, 9, 10 BASEB CN18E-3 to 6 5-C 9 M5 load check • Check code: 85 • Multi code: 1, 4, 5 BASEB CN18E-7 to 10 5-C 10 Replace EXCB. - - 11 Replace BASEB.
  • Code: 66-01, 66-11, 66-21
  • Description: Misfeed at DF turnover section
    66-01 <When DF-632 is installed> The document registration sensor (PS3) is not turned ON (unblocked) even after the lapse of a given period of time after the reverse registration operation started.
    66-11 <When DF-632 is installed> The document registration sensor (PS3) is not turned OFF (blocked) even after the lapse of a given period of time after PS3 has turned ON (unblocked) after the reverse registration operation started.
    66-21 <When DF-632 is installed> The document reading sensor (PS4) is not turned ON even after the lapse of a given period of time after the document registration sensor (PS3) is turned ON (unblocked) after the reverse registration operation started.
  • Causes: • Document reading motor (M1) • Registration motor (M3) • Document registration sensor (PS3) • Document reading sensor (PS4) • DF control board (DFCB)
  • Remedy: 1 Initial check items - - 2 PS4 I/O check, sensor check DFCB J10-3 (ON) DF-632 2-G 3 PS3 I/O check, sensor check DFCB J14-12 (ON) DF-632 5-G 4 M1 load check • Check code: 60 • Multi code 34, 35, 36, 37, 38, 39 DFCB J7-1 to 4 DF-632 2-B 5 M3 load check • Check code: 60 • Multi code: 17, 18, 19, 20 DFCB J6-1 to 4 DF-632 3-B 6 DFCB F6 conduction check - - 7 Replace DFCB.
  • Code: 66-02
  • Description: Misfeed at DF paper feed section
    <When DF-632 or DF-714 is installed> The after separate sensor (PS2) is not turned ON (blocked) even after the lapse of a given period of time after the document feed motor (M2) has turned ON.
    - Paper jam of a sheet of paper left at the DF paper feed section results, if the after separate sensor (PS2) is turned ON (blocked) when the main power switch is turned ON, a DF left cover is opened and closed, or a misfeed or malfunction is reset.
  • Causes: <When DF-632 is installed> • Document feed motor (M2) • After separate sensor (PS2) • Document length size sensor/1 (PS6) • Document length size sensor/2 (PS7) • Document width size sensor (VR1) • DF control board (DFCB)
    <When DF-714 is installed> • Document feed motor (M2) • After separate sensor (PS2) • Document length size sensor/1 (PS8) • Document length size sensor/2 (PS9) • Document width size sensor (VR1) • DF control board (DFCB)
  • Remedy: 1 Initial check items - - 2 Make the adjusting the pressure of the separation roller. - - 3 PS2 I/O check, sensor check DFCB J14-8 (ON) DF-632 6-G 4 PS6 I/O check, sensor check DFCB J12-6 (ON) DF-632 4-G 5 PS7 I/O check, sensor check DFCB J12-5 (ON) DF-632 4-G 6 VR1 I/O check, sensor check DFCB J12-3 (ON) DF-632 4-G 7 M2 load check • Check code: 60 • Multi code: 1, 2, 3, 5, 6 DFCB J5-1 to 4 DF-632 2-B 8 DFCB F3 conduction check - - 9 Replace DFCB.
    When DF-714 is installed 1 Initial check items - - 2 Make the adjusting the pressure of the separation roller. - - 3 PS2 I/O check, sensor check DFCB J14-8 (ON) DF-714 6-G 4 PS8 I/O check, sensor check DFCB J12-6 (ON) DF-714 3 to 4-G 5 PS9 I/O check, sensor check DFCB J12-5 (ON) DF-714 3-G 6 VR1 I/O check, sensor check DFCB J12-3 (ON) DF-714 4-G 7 M2 load check • Check code: 60 • Multi code: 1, 2, 3, 4, 5, 6 DFCB J5-1 to 4 DF-714 1 to 2-B 8 DFCB F3 conduction check - - 9 Replace DFCB.
  • Code: 66-03, 66-13
  • Description: Misfeed at DF transport section
    66-03 <When DF-632 or DF-714 is installed> The after separate sensor (PS2) is not turned OFF (unblocked) even after the lapse of a given period of time after PS2 has turned ON (blocked).
    66-13 <When DF-632 or DF-714 is installed> The document registration sensor (PS3) is not turned ON (unblocked) even after the lapse of a given period of time after the after separate sensor (PS2) has turned ON (blocked).
    - Paper jam of a sheet of paper left at the DF transfer section results, if the registration sensor (PS3) is turned ON (unblocked) when the main power switch is turned ON, a DF left cover is opened and closed, or a misfeed or malfunction is reset.
  • Causes:
  • Remedy:
  • Code: 66-04, 66-14
  • Description: Misfeed at DF paper exit section
    66-04 <When DF-632 is installed> The document exit sensor (PS5) is not turned ON (blocked) even after the lapse of a given period of time after the document reading sensor (PS4) has turned ON. <When DF-714 is installed> The document exit sensor (PS5) is not turned ON (blocked) even after the lapse of a given period of time after the document reading sensor (PS6) has turned ON.
    66-14 <When DF-632 is installed> The document exit sensor (PS5) is not turned OFF (unblocked) even after the lapse of a given period of time after the document reading sensor (PS4) has turned OFF. <When DF-714 is installed> The document exit sensor (PS5) is not turned OFF (unblocked) even after the lapse of a given period of time after the document reading sensor (PS6) has turned OFF.
    - Paper jam of a sheet of paper left at the DF paper exit section results, if the document exit sensor (PS5) is turned ON (blocked) when the main power switch is turned ON, a DF left cover is opened and closed, or a misfeed or malfunction is reset.
  • Causes: <When DF-632 is installed> • Document reading motor (M1) • Document reading sensor (PS4) • Document exit sensor (PS5) • DF control board (DFCB)
    <When DF-714 is installed> • Document reading motor (M1) • Document exit sensor (PS5) • Document reading sensor (PS6) • DF control board (DFCB)
  • Remedy: When DF-632 is installed 1 Initial check items - - 2 PS4 I/O check, sensor check DFCB J10-3 (ON) DF-632 2-G 3 PS5 I/O check, sensor check DFCB J15-6 (ON) DF-632 3-G 4 M1 load check • Check code: 60 • Multi code 34, 35, 36, 37, 38, 39 DFCB J7-1 to 4 DF-632 2-B 5 Replace DFCB.
    When DF-714 is installed 1 Initial check items - - 2 PS6 I/O check, sensor check DFCB J10-3 (ON) DF-714 2-G 3 PS5 I/O check, sensor check DFCB J15-6 (ON) DF-714 3-G 4 M1 load check • Check code: 60 • Multi code: 34, 35, 37, 40 DFCB J7-1 to 4 DF-714 1-B 5 Replace DFCB.
  • Code: 66-05, 66-06, 66-15
  • Description: Misfeed at DF image reading section
    66-05 <When DF-632 is installed> The document reading sensor (PS4) is not turned OFF even after the lapse of a given period of time after the document registration sensor (PS3) has turned OFF (blocked). <When DF-714 is installed> The document reading sensor (PS6) is not turned OFF even after the lapse of a given period of time after the document registration sensor (PS3) has turned OFF (blocked).
    66-06 <When DF-632 is installed> The document reading sensor (PS4) is turned ON earlier than a given time after PS4 is turned OFF during original transportation. <When DF-714 is installed> The document reading sensor (PS6) is turned ON earlier than a given time after PS6 is turned OFF during original transportation.
    66-15 <When DF-632 is installed> The document reading sensor (PS4) does not turn OFF even after the lapse of a given period of time after the document registration sensor (PS3) is turned OFF (blocked) after the reverse read operation started.
    - Paper jam of a sheet of paper left at the DF image reading section results, if the document reading sensor (PS4, PS6) is turned ON when the main power switch is turned ON, a DF left cover is opened and closed, or a misfeed or malfunction is reset.
  • Causes: <When DF-632 is installed> • Document reading motor (M1) • Reading roll release motor (M5) • Document registration sensor (PS3) • Document reading sensor (PS4) • DF control board (DFCB)
    <When DF-714 is installed> • Document reading motor (M1) • Reading roll release motor (M4) • Document registration sensor (PS3) • Document reading sensor (PS6) • DF control board (DFCB)
  • Remedy: When DF-632 is installed 1 Initial check items - - 2 Make the adjustment of original stop position. - - 3 PS3 I/O check, sensor check DFCB J14-12 (ON) DF-632 5-G 4 PS4 I/O check, sensor check DFCB J10-3 (ON) DF-632 2-G 5 M1 load check • Check code: 60 • Multi code 34, 35, 36, 37, 38, 39 DFCB J7-1 to 4 DF-632 2-B 6 M5 load check • Check code: 60 • Multi code: 81, 82 DFCB J18-4 to 5 DF-632 2-G 7 Replace DFCB.
    When DF-714 is installed 1 Initial check items - - 2 Make the adjustment of original stop position. - - 3 PS3 I/O check, sensor check DFCB J14-12 (ON) DF-714 4-G 4 PS6 I/O check, sensor check DFCB J10-3 (ON) DF-714 2-G 5 M1 load check • Check code: 60 • Multi code: 34, 35, 37, 40 DFCB J7-1 to 4 DF-714 1-B 6 M4 load check • Check code: 60 • Multi code: 81, 82 DFCB J18-4 to 5 DF-714 1-G 7 Replace DFCB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us