Description: IR exposure lamp malfunction
- When the power switch is turned ON or a scan operation is completed, the light quantity is checked and the shading compensation is performed. At this time, trouble is detected.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between CIS-MFPB P102 for proper connection and correct as necessary. 3 Change CIS 4 Change MFPB.
Code: CC151
Description: Flash ROM error
- The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware.
- When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display.
- If this error message appears, no operations can then be performed. It is not possible to upgrade the firmware from a PC connected through USB connection, either.
Remedy: 1 Check the MFPB connectors for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Perform upgrading of the firmware. 4 Change MFPB.
Code: CC153
Description: Engine flash ROM error
- Data of flash ROM of the engine control system is determined to be faulty.
Remedy: 1 Check the MFPB connectors for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Perform upgrading of the firmware. 4 Change MFPB.
Code: CC163
Description: Engine connection failure
- The controller can not communicate with the engine control system.
- Incorrect engine firmware is installed.
Remedy: 1 Turn OFF and ON the power switch. 2 Check whether the correct engine firmware is installed. If not, rewrite the firmware. J.1. Rewriting of firmware 3 Check the MFPB connectors for proper connection and correct as necessary. 4 Change MFPB.
Code: CD301
Description: EEPROM error
- Contact the responsible people of KMBT before taking some countermeasures.